Home/Guides/Sports

Run a water polo game from the dashboard

Run the quarter clock and the shot clock, show exclusions with their 20-second clocks, track personal fouls, put the goal scorer on air and keep score through a shootout.

Updated 8 min readFree

Water polo needs more than a score and a clock. There's a shot clock that resets on every change of possession, players excluded for 20 seconds at a time, personal fouls that add up to a player being out, and a shootout to settle a tie. The ScoreCastr water polo dashboard handles all of it, and the exclusion clocks run with the game clock. This guide walks through the four water polo tabs: Game, Exclusions, Shootout and Stats.

Short versionOn the Game tab, click Start clock at the sprint. Score with the Goal button: it stops both clocks and resets the shot clock. Reset the shot clock with Reset 30 or Reset 20. For an exclusion, open the Exclusions tab, pick the team, the foul and the cap, and click Apply foul.

Set up the match

Create the match: pick Water Polo, name both teams and set their four-character scorebug names. See Create your first match. Under Game settings, pick:

  • Quarter length: 8 min · College, international, 7 min · High school varsity, 6 min · JV, 14U or 5 min · 12U.
  • Overtime length: 3 min, 4 min or 2 min.
  • Timeouts per team: 2, 3 or 4.
  • Shot clock: 30, 35 or 25 seconds, and the Short reset: 20 or 15 seconds.

You can change all of these later from the dashboard. Rosters hold 13 players, with caps 1 and 13 for the goalkeepers. Open the match. The game controls sit on the right, starting on the Game tab.

Quarters and the clock

The clock box on the Game tab has:

  • Start clock and Stop clock, Reset, and −1:00, −0:01, +0:01 and +1:00 to match the pool clock. The clock stops by itself at 0:00.
  • ‹ and › beside the period step through the quarters, overtime and the shootout. › starts the next period on a full, stopped clock. ‹ stops the clock and keeps its time.
  • Go to: Q1 to Q4, OT and SO jump straight to that period, each on a full, stopped clock (the shootout has no clock).
  • Quarters: changes the quarter length and restarts the current quarter on a stopped clock. In overtime the dropdown reads Overtime and sets the overtime length instead.
  • Set final marks the game final and stops the clock. The button then reads Final ✓.

The shot clock

The shot clock runs and stops with the game clock, so you don't start it separately. When it reaches 0 both clocks stop.

  • Reset 30 puts it back to the full shot clock, for example after a shot or a turnover.
  • Reset 20 gives the short reset, for example after an exclusion or a corner throw.
  • −1 and +1 fix it by a second.

The two buttons follow the match's settings, so a 35-second match shows Reset 35. To change the shot clock settings during a game, select Score Bug in the Rundown and pick Shot clock and Short reset under Water polo in the Inspector. Timeouts per team is there too.

Goals and the goal scorer

  • Goal beside each team's score adds a goal to the current period and plays the GOAL takeover on the scorebug. It also stops both clocks, resets the shot clock to full and brings back every excluded player, except one serving a brutality.
  • −1 takes a goal off, with no animation.

A goal scored while the other team is short counts as a 6 on 5 goal on the Stats tab. A goal scored while the team's 5 m penalty banner is up counts as a 5 m goal and clears the banner.

To show who scored, use Goal scorer below the scores. After a Goal, it switches to the scoring team and lights 6 on 5 or 5 m penalty when the goal was one. Click the scorer's cap, then Show scorer. The scorebug shows the cap, the name from the roster and the tag. Goalkeeper caps 1 and 13 have a red outline.

Score by quarter shows Q1, Q2, Q3, Q4, OT and SO for each team, each with its own − and + to fix an earlier period without an animation. ScoreCastr doesn't keep goals per player.

Timeouts, sprints and 5 m penalties

  • T/O under a team's name uses one of its timeouts and stops the clock. The bars show how many are left; +1 gives one back.
  • Won sprint counts the sprint at the start of a quarter and shows a SPRINT bar on the scorebug with the sprint count.
  • 5 m penalty puts that team's 5 m PENALTY banner on the scorebug. Click it again to take it off. A goal clears it.

Exclusions and personal fouls

The Exclusions tab works on every plan. The bar at the top shows the strength, for example Even · 6 on 6 or MRL man up · 6 on 5, and when the next player is back.

  1. Under Apply a foul, click the team that committed it.
  2. Pick the foul:
    • Exclusion · 20 s
    • Penalty foul · 5 m
    • Misconduct · out for the game
    • Brutality · 4:00, out for the game
    • Simultaneous · one each side
  3. Click the player's cap. For a simultaneous exclusion, also pick the other team's player.
  4. Click Apply foul.

An exclusion stops the clocks and moves the shot clock up to at least the short reset. The player goes on the Serving list with a 20-second clock (4:00 for brutality), and the scorebug shows the exclusion. The other team gets a 6 on 5 try. A penalty foul doesn't put anyone out: it gives the other team its 5 m penalty banner instead.

Exclusion clocks run with the game clock and carry across quarters. When one runs out, the player drops off the list. When the excluded team wins the ball back, the player can come in early: click ×. −0:01 and +0:01 fix the time left.

Every foul is also a personal foul for that cap. Personal fouls lists each player with fouls. A player on two shows 1 more = out. Three personal fouls, a misconduct or a brutality and the player is Out for the game, and their cap is crossed out in the cap grids. Use − and + to fix a count. Show foul trouble puts the players on two or more fouls on the scorebug until you click Hide foul trouble.

Shootout

Click SO under Go to (or › from overtime) to go to the shootout. Until then the Shootout tab says The shootout starts when the period is SO. In the shootout, each team has its shootout score and three buttons:

  • Goal records a scored shot.
  • Miss records a missed or saved shot.
  • Undo takes back that team's last shot.

The Shots grid shows each round: G for a goal, ✗ for a miss and … for the next shot. After five rounds each, a tie goes on to sudden-death rounds (SD1, SD2 and so on).

Shootout goals don't count in the final score. The scorebug shows them in brackets, and the shootout decides the winner. During the shootout, Goal on the Game tab also records a goal shot and −1 takes back the team's last goal. When it's decided, click End → Final, or ← Back to OT if you went too early.

Stats and the scorebug

Quick stats on the Game tab has +Shot, +Save, +Steal and +TO (turnover) for each team.

The Stats tab (Starter plan) has − and + for both teams' Shots, Saves, Exclusions drawn, 6 on 5 goals, 6 on 5 tries, 5 m goals, 5 m shots, Steals, Turnovers, Blocks, Sprints won and Exclusions. Fouls applied on the Exclusions tab count exclusions, exclusions drawn, 6 on 5 tries and 5 m shots for you. Show on a row puts that stat on the scorebug until you click it again. One stat shows at a time.

Under Show on scorebug on the Game tab, Clock, Shot clock and Timeouts left hide or show those parts, Sponsor logo turns the sponsor spot off and on, and Title turns on the title bar. Hiding a clock doesn't stop it.

Match ▾ in the top bar has Match stats. Water polo has no box score PDF.

Graphics and Stream Deck

The water polo score bug and scoreboard come in Classic, Apex, Primetime, Ledger and Blitz. On Starter, water polo adds Away Starters and Home Starters (the starting seven: goalkeeper and six field players), Away Player Bio, Home Player Bio and Halftime Stats to the shared graphics. Find them in the Rundown on the left; the scoreboard and Halftime Stats are in the last group, Between quarters. Select one to edit it in the Inspector, then click TAKE.

Water polo codes run from 2900 to 2957. Click Shortcuts: off in the top bar and turn on the switch so it reads Listening for codes.

Code Action
2908 / 2909 Start / Stop Clock
2916 / 2917 Shot Clock Reset Full / Short
2921 / 2923 Away / Home Goal (plays GOAL)
2925 / 2926 Away / Home Timeout
2927 / 2928 Away / Home Won Sprint
2929 / 2930 Away / Home 5 m Penalty on or off
2931 Foul trouble on or off
2957 Show Goal Scorer
2932 / 2935 Away / Home Shootout Goal
2933 / 2936 Away / Home Shootout Miss
2954 Toggle Final

The goal −1 codes (2922 and 2924) take a goal off with no animation. Exclusions have no code, because each one needs the player's cap: apply them on the Exclusions tab. See Set up a Stream Deck for the ready-made water polo profile.

On a phone (under 700 pixels wide), tap Game in the bottom bar for the four water polo tabs. The top bar tools move to Menu, and phones have no Take ID box or shortcut codes.

Checklist

  • Quarter length, shot clock and timeouts set before the sprint
  • Shot clock reset on every change of possession
  • Every exclusion applied with the right cap
  • Excluded players brought back with × when they come in early
  • Every shootout shot recorded with Goal or Miss
  • Shootout ended with End → Final